Double Alpha Race Master Holster Insert, Magnetic


Note: Both the Race Master and the Alpha-X holsters use the same insert blocks.
The Race Master Holster utilizes an efficient and easy system to allow shooters to switch their holster from one gun type to another by means of changing the Insert Block Assembly. This switch is fast and easy and can be done in less than a minute, and without losing any of the holster's adjustments or settings.
The Insert Block Assembly includes:
1. The Locking Block (gun specific).
2. The Sliding Lock, assembled (gun specific).
3. The safety lever, assembled.
4. The internal magnetic activation system, assembled.
5. ”Magnetic logo” to cover over side hole in holsters which may still have it.
The Insert block grips the pistol only on the front end of the trigger guard, and a very precise fit is required in that area. In some cases some light modifications to the Insert Block may be required.
Should you need to dismantle your insert block for some fitting, follow these steps:
1. Remove the insert block from the holster by removing the two small M4 screws from the back of the holster.
2. Using a punch and hammer, push the two steel pins from the front of the block towards the back (push from the side with the gun type engraved). These pins may be tight.
3. Once the pins are out, the plastic wedge holding the 2nd magnet will come out. Make sure the magnet does not fall out the part. It is usually held snugly it its pocket.
4. Use a marker to make a dot on the top of the magnet which is embedded in the slide lock. This will make it easy for you to ensure that you reassemble it with the correct side up. Most likely it will fall out or you will want to remove it while fitting the slide lock.
5. To remove the slide lock from the block, unscrew the M3 screw visible from the back of the block - and then slide the slide lock upwards and out through the window in the block - passed the safety lever, which must be in the unlocked position.
To reassemble- reverse your steps.
The Race-Master Holster Insert Blocks are design to be used in either RH or LH holsters. The same insert works for both.

Andra kunder tittade även på...

Double Alpha Alpha-X holster, no insert
Double Alpha JDA102424
Finns i lager
1 975 kr Mer info
Double Alpha DA competition
Double Alpha JDA100370
Finns i lager
från 595 kr Mer info
Double Alpha DA Racer magazine pouch svart
Double Alpha JDA101182
Finns i lager
375 kr Köp
Double Alpha Race master mag pouch, black
Double Alpha JDAA101060
Finns i lager
625 kr Köp
Double Alpha DA Alpha-X logo color inserts, left hand
Double Alpha JDA102395LH
Finns i lager
43 kr Mer info
Double Alpha DAA Magnet with M5 screw for Race Master pouch
Double Alpha JDA101094
Finns i lager
245 kr Köp
Double Alpha DA Alpha-X logo color inserts, right hand
Double Alpha JDA102395
Finns i lager
43 kr Mer info
Double Alpha Race master mag pouch, gold
Double Alpha JDA101451
Finns i lager
695 kr Köp

Andra som köpte Double Alpha Race Master Holster Insert, Magnetic har även köpt...

Double Alpha DA Racer holster CZ
Double Alpha JDA101222
Finns i lager
1 145 kr Köp
Akai Custom Begagnat Akai Custom Openpistolset med extra pipa
Kontakta säljaren, se nedan.
120 000 kr (200 000 kr) Mer info
Double Alpha DAA Competition belt security loop
Double Alpha JDA100400
Finns i lager
85 kr Köp
Nordic Components Nordic Components PCC gevär
Nordic Components JVAP-NCPCC
Finns i lager
21 995 kr Köp
Double Alpha UpLULA - Universal mag loader assist,
Double Alpha JDA101910
Finns i lager
från 410 kr Mer info
Double Alpha DA Racer magazine pouch Black, AR-15
Double Alpha JDA102150
Finns i lager
465 kr Köp
Spuhr SPUHR A-0119 Bubble Level Assembly
Spuhr A-0119
Finns i lager
1 080 kr Köp
Standardvy | Byt till Mobil vy