Stäng
Armalite Enhanced bolt assembly

Produktinformation:

To satisfy customer requests, we now offer the new JP EnhancedBolt™ with great life expectancy while utilizing a standard configuration extractor.

The truth is, the standard Mil-spec 8620 bolt has a number of factors limiting its performance, not the least of which is that the life expectancy of such bolts is only about 6,000 rounds. In fact, standard bolts will start to show stress cracks on the locking lugs adjacent to the extractor cut after only 3,000 rounds. Cracking at the cam pin hole and weak extractor spring tension only add to the problems of the Mil-spec bolt.
The material used in these standard bolts is also not the best choice by today's standards, but if you remember the old story that explains why ”Mil-spec never dies,” that applies here as well; they make them this way because they've always made them this way.

The latest edition JP EnhancedBolt™ is made from SAE 9310 high-grade steel. This material makes for an extremely hard surface with a tough, ductile core resistant to structural failure and a life expectancy far exceeding Mil-spec 8620-type bolts. SAE 9310 is the same type of steel used in the transmission gears of Formula One racecars, and the high-load application of a bolt assembly is ideal for this state-of-the-art material; the results of actual full-auto endurance torture tests prove it.

The design of the JP EnhancedBolt™ addresses many other fine points, the most important of which is the utilization of a standard configuration extractor. Most users want the ability to replace extractors and other parts with commonly available Mil-spec parts instead of being dependent on proprietary parts that can be difficult to acquire. Therefore, this new bolt will accept standard extractors, pins and springs.

The JP EnhancedBolt™ will now be standard equipment on all JP .223 and .308 rifles and uppers, and we highly recommend it as a complement to your JP High Performance Bolt Carriers or any rifle system. The .223 version of the bolt is compatible with any AR-15 platform using a Mil-spec bolt carrier and subcomponents. The .308 version is compatible with the JP LRP-07 and the DPMS LR-308 platforms (or clones thereof) only and cannot be used to replace bolts in the Armalite AR-10 platform (or clones thereof).

LICENSPLIKTIGT



Andra kunder tittade även på...

JP Enhanced bolt assembly
JP
Art.nr JVAPINEB-223
1 495 kr Köp
Stag Arms Stag RH bolt assembly
Stag Arms
Art.nr JVAPINSTGBOLT
895 kr Köp
Aimpoint Aimpoint CompM5 2MOA, no Mount
Aimpoint
Art.nr Aimpoint-200320
6 965 kr Köp
JP JP-15LA
JP
Art.nr JINJP-15LA
10 995 kr Köp
JP JP-15LR
JP
Art.nr JINJP-15LR
3 195 kr Köp
Stag Arms Stag bolt assembly LH
Stag Arms
Art.nr JINSTGBOLTLH
1 245 kr Köp
Vortex Vortex Viper PST Gen II 3-15x44 FFP EBR-2C MRAD Belyst
-31%
KAMPANJ
Vortex
Art.nr PST-3158
9 590 kr (13 995 kr) Köp
Vortex Vortex Diamondback 3-9x40
KAMPANJ
Vortex
Art.nr DBK-01-BDC
från 2 395 kr (3 190 kr) Mer info

Andra som köpte Armalite Enhanced bolt assembly har även köpt...

JP JP enhanced bolt assembly group
JP
Art.nr JVAPINBC-EB223
2 095 kr Köp
JP JP SS full mass carrier
JP
Art.nr JINJPBC-2
3 295 kr Köp
JP JP .223 Enhanced gas ring
JP
Art.nr JINJPEGR-223
155 kr Köp
Stag Arms Stag RH bolt carrier
Stag Arms
Art.nr JINSTGBOLTCARRH
1 695 kr Köp
JP JP silent captured spring AR-15
JP
Art.nr JINJPSCS-AR-15
1 895 kr Köp
JP JP GMR-15
JP
Art.nr JVAP-JPGMR-15
31 995 kr Köp
JP JP AR-15 Titanium firing pin
JP
Art.nr JINJPFP-223T
455 kr Köp
Standardvy | Byt till Mobil vy